CoolLED1248
Language:
← Back to Help Center

iLedClock Manual

Product Introduction

Welcome to Your Product Manual

Thank you for your purchase! Please read this manual carefully before using the product to ensure that you can use our product correctly and safely. We are committed to providing you with the best products and the highest quality service. Thank you for your trust and support!

iLedClock

This comprehensive guide contains all the information you need to get the most out of your device.

Precautions

1. This product does not have a built-in battery and must be connected to a power source before use.
2. Please use a 5V USB power supply.
3. Do not drop, crush, or disassemble the product yourself.
4. Do not use in humid or high-temperature environments.

Product Diagram

Product diagram
  1. 1Button 1
  2. 2Button 2
  3. 3Button 3
  4. 4Power port

Button Functions

Button 1

  1. Short press to enter/switch the quick countdown function.

Button 2 (Note: this button's function varies by mode)

  1. Program playback: short press to switch programs.
  2. Alarm ringing: short press to snooze, long press to stop.
  3. Reminder ringing: short press to stop.
  4. Time & date: short press to switch between time and date display.
  5. Timer mode: short press to pause, long press to reset the time.

Button 3

  1. Short press to switch functions, long press to turn on/off, extra long press to reset.

App Download

Please use your browser to scan the QR code to download the app. Apple users can search for "CoolLED1248" in the App Store to download it.

3in1 qr code

(3 in 1)

If you cannot scan this 3-in-1 QR code to download, you can also scan the following two QR codes to download.

IOS

App Store

Android

Google Play

Tip:Make sure to download the official app from trusted sources only. Our app is free and does not require any payment information.

Connect Device

Before connecting the device, please connect the device correctly according to the connection diagram, power on the device, and keep the device turned on to ensure that the device can be successfully connected and used.

  1. Please allow the app to request necessary permissions to ensure the normal functioning of the app.
  2. In order to use this application, you need to turn on the Bluetooth of your mobile phone. Please authorize to turn on Bluetooth in the application.
Connection dialog
  1. The app will automatically search for display devices and display them in the device list. If the search fails, pull down to refresh the device list to search again.
  2. Please click the device you want to connect to and wait for the device to connect successfully. If the connection fails, pull down to refresh the device list and then reconnect the device.
Warning:Do not use the Bluetooth in your phone settings to connect to your device! Please open the app and connect to your device in the device list.

Device list

Device list
Tips:
  1. Please pull down to search for a device.
  2. If the device cannot be searched for several times, please check whether the permissions are enabled and restart the device.

Sync Time

If the device has no network connection or the time is inaccurate, please connect the device via the app, go to the settings page, and manually sync the local time to the device.

Help & Feedback

  1. If you want to know more about the product, how to use it, and solutions to common problems, please check the [Help Center] in the APP settings menu.
  2. If you have any comments, suggestions or need help with our products, please contact us through [Contact Us] in the APP settings menu.

RF Information

Wireless Standard: Bluetooth Low Energy (BLE)

Frequency Range: 2402MHz-2480MHz

Max Transmit Power: 1mW

Class III Appliance Warning

This appliance must only be supplied by a safety extra-low voltage corresponding to the marking.

Maintained by the official CoolLED1248 team.